KeyFOB Tricks
Written by Rob Saturday, 03 October 2009 17:00
This is a list of a few things you can do with the FOB and you dont need EVIC:
To turn off/on "Flash Lights On Lock/Unlock":
1. Press the UNLOCK button for 4 to 10 seconds.
2. While the UNLOCK button is pressed, (after 4 seconds) press the LOCK button. Release both buttons.
The "Flash Lights On Lock/Unlock" feature can be reactivated by repeating this procedure.
To turn off/on "Remote Unlock Driver's Door 1st":
1. Press the LOCK button for 4 to 10 seconds.
2. While the LOCK button is pressed, (after 4 seconds) press the UNLOCK button. Release both buttons.
The "Remote Unlock Driver's Door 1st" can be reactivated by repeating this procedure.
To turn off/on "Sound Horn On Lock":
1. Press the LOCK button for 4 to 10 seconds.
2. While the LOCK button is pressed, (after 4 seconds) press the PANIC button. Release both buttons.
The "Sound Horn On Lock" feature can be reactivated by repeating this procedure.
Automatic Door Locks at 15mph:
For vehicles not equipped with the EVIC, the Automatic Door Locks can be enabled or disabled by performing the following procedure:
- Close all doors and place the key in the ignition.
- Cycle the ignition switch between LOCK and ON and back to LOCK 4 times ending in the LOCK position.
- Depress the power door lock switch to lock the doors.
- A single chime will indicate the completion of the programming.
Automatic Unlock:
- Close all doors and place the key in the ignition.
- Cycle the ignition switch between LOCK and ON and back to LOCK 4 times ending in the LOCK position.
- Depress the power door unlock switch to lock the doors.
- A single chime will indicate the completion of the programming.
To turn off/on "Flash Lights On Lock/Unlock":
1. Press the UNLOCK button for 4 to 10 seconds.
2. While the UNLOCK button is pressed, (after 4 seconds) press the LOCK button. Release both buttons.
The "Flash Lights On Lock/Unlock" feature can be reactivated by repeating this procedure.
